-
£35.94 Ex VAT
- Inc VAT: £43.13
14192
- 10 or more £32.35 ea. (Ex VAT)
- 20 or more £29.12 ea. (Ex VAT)
- In Stock Ready To Go In Our Warehouse.
- Same Day Dispatch Order before 2PM.
- Secure Shopping High Security Checkout.
- Availability: In Stock
- Brand: Start Traffic
Loose Road Surface Quick Fit Sign Face (Frame Not Included)
This quick-fit road sign face shows diagram 7001, Loose Chippings, with 7009.1, Skid Risk/ Maximum Speed 20mph. Its use is for when a new surface dressing has been applied to the road surface.
Although this process is for improving the skidding resistance and preventing water ingress, the loose gravel left behind can cause a hazard. Workers will spray the road with hot bitumen and roll in stone chippings to fill any gaps. The road is brushed but loose and left over chippings will remain. This can pose a threat to road users as loose stones can get thrown into the path of oncoming traffic or vehicles can skid across the surface.
Fully Compliant
While road works are happening, 7009 with the plate to diagram 513.2 is used with a max speed of 10 miles per hour. Once complete and the traffic authority permits there is less danger, the speed limit may be increased to 20mph through the plate to 7009.1. It is not permitted to change this speed. Further advice on signing during surface dressing operations can be found here.
This would be positioned on the left hand side of UK roads. Our quick-fit range is made from high-quality 3mm PVC and is graded at RA1 reflectivity to gently highlight the wording without the extra cost of higher reflectivity. The skid sign comes with 300mm hole centres for use on a quick-fit mini frame. Other sizes can be ordered upon request, however.
Our Quick Fit Sign Faces
Be sure to get the right size of sign for your requirements. There are four key elements to consider, which is the size of the sign face, the reflectivity grade, and the mounting hole spacing of the sign faces.
600mm & 750mm Sizes
- 3mm Plastic Backing
- RA1 Reflective Material
- 300mm Hole Centres
900mm Sizes
- 5mm GRP Backing
- HIP Class 2 Reflectivity
- 300mm & 750mm Hole Centres
- Reinforcing Eyelets On Holes
1200mm Sizes
- 5mm GRP Backing
- HIP Class 2 Reflectivity
- 300mm & 750mm Hole Centres
- Reinforcing Eyelets On Holes
1500mm Sizes
- 5mm GRP Backing
- HIP Class 2 Reflectivity
- 750mm Hole Centres
- Reinforcing Eyelets On Holes
Quick Fit Reflectivity Grades
RA1 - Suitable for street works and slower speed limits, this is supplied on all 650m and 750mm sizes.
Class 2 R2 / RA2 / HIP - High-intensity Prismatic, Suitable for high-speed roadworks on motorways, national speed limits.
Measuring Hole Centres
These should match the sign frames that you already have, or are intending to buy. Some of our signs will come with both sets of holes drilled.
Measuring Sign Face Size
The size of the sign face that you need will be dictated by the guidelines in the Chapter 8 guidelines.
Backing Material
Smaller sizes of signs (650mm & 750mm) are available on a 3mm plastic backing board. Larger sizes are fixed to a more rigid GRP backing board. GRP signs are fitted with eyelets for extra strength. If you need Composite or Dibond sign faces please call us.
Need Assistance Finding The Right Sign?
If you need any assistance finding the right sized sign or frame then please give our customer service team a call on +44 (0)1905 794875. We have many other ranges of signs available including Q-signs, “classic” metal sign faces, and permanent signs.
Specifications
Certifications | |
Conforms | The Red Book / Chapter 8 |
Diagram Reference | 7009, 7009.1 |
AccuChecked | ✔ (The specification has been independently checked for accuracy) |
AccuPhoto | ✔ (The photos are of the actual product type that you are ordering) |
Dimensions | |
Depth | 3mm in Plastic, |
Material | |
Type | Printed AEGP or HIP Vinyl on Plastic or GRP substrate |
Customer Questions & Answers
Be the first to ask a question.