🍪 Tasty Cookies: This website uses cookies to improve your experience. You can opt in or out. See our privacy policy.  

Clear Primer for Thermoplastic Marking - Hotline Preparation

  • £84.33 Ex VAT 
  • Inc VAT: £101.20
Product Code
12276
Looking for larger quantities?

  • In Stock Ready To Go In Our Warehouse.
  • Same Day Dispatch Order before 2PM.
  • Secure Shopping High Security Checkout.


  • Availability: In Stock
  • Brand: Start Traffic

Clear Road Mark Primer - 5-litre tin

Please see ‘Downloads’ for product description, instructions for use and safety datasheet

Use our clear road marking primer before applying thermoplastic road markings on concrete or on particularly worn surfaces.

  • Recommended when applying to concrete or worn asphalt / other bituminous surfaces
  • Low viscosity facilitates deep penetration into substrates
  • Virtually colourless
  • Ready to use
  • Fast drying
  • Easy to apply

How to Use Thermoplastic Primer

Please read the full datasheet (under 'Downloads') for full product application instructions.

  • Make sure the surface is clean before applying and is free from any contamination including dust, dirt, oil, grease etc.
  • The prepared surface must be totally covered with a thin even coating of clear road primer - This product can be applied using spray, brush or roller.
  • Never pour onto the surface.  Ensure that the primer is thoroughly dry before applying the subsequent thermoplastic material.

How much do I need?

A 5-litre tin will be enough for approximately:

  • 100 - 110 rolls of 100mm x 5-metre thermoplastic marking
  • 70 - 80 rolls of 150mm x 5-metre thermoplastic marking
  • 50 - 60 rolls of 200mm x 5 metres thermoplastic marking

The guidance of 12 to 15 m2 per litre @ 66 to 83 microns wet film thickness means the that 1 litre is enough for:

  • 24 rolls of 100mm x 5 metre thermoplastic marking
  • 16 rolls of 150mm x 5 metre thermoplastic marking
  • 12 rolls of 200mm x 5 metres thermoplastic marking

Customers Who Viewed This Page Also Viewed


Specifications

Certifications
AccuChecked ✔ (The specification has been independently checked for accuracy)
AccuPhoto ✔ (The photos are of the actual product type that you are ordering)
Weight
Per Unit ~5 kg
Miscellaneous
Drying Time 10-15 minutes
Application Temperature 1 - 50°C surface temperature
Coverage 12 to 15 m2 per litre @ 66 to 83 microns wet film thickness.

Downloads


Customer Questions & Answers

Be the first to ask a question.

Contact Us

Weekdays 8:30AM to 5PM

Address:

Start Safety, Drury Lane,
Martin Hussingtree,
Worcester, WR3 8TD

Phone:

+44 (0)1905 794875

Email:

Send Us An Email

Testimonials

Where We Are

Google Maps