- £1.20 Ex VAT
- Inc VAT: £1.44
- 50 or more £1.10 ea. (Ex VAT)
- 100 or more £0.99 ea. (Ex VAT)
- In Stock Ready To Go In Our Warehouse.
- Same Day Dispatch Order before 2PM.
- Secure Shopping High Security Checkout.
- Availability: In Stock
- Manufacturer: Start Traffic
Sign Clips for Post / Pole Mount Signs- Rigid 'D' Clip
This clip is designed to be used specifically with a 50mm poles, 76mm (3” diameter) poles or 89mm poles. Two of these are required to mount one post mountable sign, each clip securing one rail to the pole via a nut and bolt mechanism.
This clip is compatible with all of our post mounted signs as long as you are mounting to the correct size post for the clip size chosen. For unusual sized poles, our universal clamp set will be appropriate.
For areas where a pole-mounted sign is required for enforcing speed limits, two signs will usually be mounted (one each side of the pole) to cater for the different speeds going in or out of an area. This can be achieved through the use of two back-to-back clips in conjunction with these rigid-'D' clips.
How To Install A Rigid-'D' Clamp
Hold your post mountable sign against the pole. Slot the square-headed bolt into one side of the rail and the small, shaped end of the clip into the other.
Pinch the clip over the bolt and firmly hold in place with one hand while using your free hand to tighten the nut enough so that the clamp supports the weight.
Repeat steps 1 and 2 for the bottom clip.
Check the front of the sign to ensure it is perfectly vertical, before tightening all bolts with a spanner or ratchet to secure the sign.
Other Types of Sign Clip Available
Rigid 'D' Clip
This style of clamp is a available in a range of sizes. The rigid-Anti Rotational Sign Clip is designed to be specifically used with specific sizes of post.
These are used if you need to have two signs mounted on one pole back to back and are only compatible with the 76mm rigid clip. To mount two signs back to back you would require two 'Post clips' and two sets of the Back-to-back clips.
The universal clamp works with any pole from 45mm to 217mm including odd pole profiles. However, they are not compatible with back-to-back clips.
Do You Have Questions About Installing Your Sign Clip?
Give us a call on 01905 794 875, our sales team will assist you through the process.
Customers Who Viewed This Page Also Viewed
Traffic Joins Main Carriageway Post Mounted Sign - Diagram 509.1 R2/RA2 (Face Only) £32.95
|AccuChecked||✔ (The specification has been independently checked for accuracy)|
|AccuPhoto||✔ (The photos are of the actual product type that you are ordering)|
|Diameter||Designed for 76mm, 89mm posts|
|Per Unit||76mm: 80g|
|Type||Stainless Steel Fixing|
Customer Questions & Answers
Be the first to ask a question.