- £13.51 Ex VAT
- Inc VAT: £16.21
15835
- In Stock Ready To Go In Our Warehouse.
- Same Day Dispatch Order before 2PM.
- Secure Shopping High Security Checkout.
- Availability: In Stock
- Brand: Start Traffic
Start Traffic HiTack Clear Thermoplastic Primer
Perfect for small applications of thermoplastic markings, this clear Thermoplastic primer should be used prior to application of the markings to maximise adhesion. This product can be accurately applied using the spray nozzle on the top cap allowing you to minimise excess product used at one time.
This product has a shelf life of 12 months when stored correctly in a cool, dry place, optimal storage temperature is between 10°C - 20°C. Once opened the primer should be used within 6 months of the original opening date.
Before using the primer it is important to correctly clean and prepare your surfaces to allow the primer to perform as its intended. Preparation of the surface is key to the performance of the HiTack primer as a dirty surface will not allow for the same performance as a clean, well-prepared surface.
How Much Do I Need To Use?
The primer should be applied at a rate between 200ml/m² to 400ml/m² depending on the density and porosity of the substrate. In any case, continue applying the primer until saturation occurs to obtain a thin continuous resin film. For extremely porous substrates you may need to apply a second coat for it to be fully effective.
Directions For Use:
- Make sure the surface is dry and free of dust, oil and any other surface contaminants.
- Shake the can well and point the spray nozzle at the ground approximately 20cm from the surface.
- Press the trigger on the can and evenly apply to the surface in a sweeping motion.
- Leave for 5-10 minutes or until fully cured before applying your thermoplastic marking
When Do I Need A Thermoplastic Primer?
A Thermoplastic primer is required when the surface you wish to apply your marking to is;
- Concrete
- Block Paved Surface
- Worn Tarmac or Asphalt
Although these are the most common surfaces the primer should be applied to, it is not limited to only these surfaces.
Are You Primed And Ready To Order?
If you feel you know all you need to know about this product, then the next step is to place your order! If you'd like to speak to a memeber of our sales team before hand just to clarify any small details, give them a call on +44 (0)1905 794875, they will be more than happy to help you make your decision on this great product and more like it.
Customers Who Viewed This Page Also Viewed
Specifications
| Dimensions | |
| Diameter | 60mm |
| Height | 275mm |
| Miscellaneous | |
| Capacity | 600ml |
| Drying Time | 5 - 10 Minutes |
Downloads
Customer Questions & Answers
Be the first to ask a question.
