- £13.20 Ex VAT
- Inc VAT: £15.84
15102-P-750
- 30 or more £12.87 ea. (Ex VAT)
- 60 or more £12.54 ea. (Ex VAT)
- In Stock Ready To Go In Our Warehouse.
- Same Day Dispatch Order before 2PM.
- Secure Shopping High Security Checkout.
- Availability: In Stock
- Brand: Start Traffic
Road Narrows Both Quick Fit Sign Face (Frame Not Included)
This quick fit road narrows both sign face should be used to give warning that the current section of road is going to reduce in width. This specific sign under diagram 516 is generally used where the road is obstructed on both sides of the road somewhat equally. It is almost always used with a supplementary plate stating “Single file traffic”.
This warns drivers that they may need to give way to oncoming traffic, or just that there is not enough room for two vehicles to pass. Alternative versions of this sign include a road narrows right, and road narrows left variations. These are used where the reduction in width of the roadway is primarily from one side, as is the case with most roadworks.
This sign should be used in accordance with the guidelines published in the Chapter 8 and Chapter 4 traffic signs manuals. Links to both of these documents can be found on our regulations page.
Our Quick Fit Sign Faces
Be sure to get the right size of sign for your requirements. There are four key elements to consider, which is the size of the sign face, the reflectivity grade, and the mounting hole spacing of the sign faces.
600mm & 750mm Sizes
- 3mm Plastic Backing
- RA1 Reflective Material
- 300mm Hole Centres
900mm Sizes
- 5mm GRP Backing
- HIP Class 2 Reflectivity
- 300mm & 750mm Hole Centres
- Reinforcing Eyelets On Holes
1200mm Sizes
- 5mm GRP Backing
- HIP Class 2 Reflectivity
- 300mm & 750mm Hole Centres
- Reinforcing Eyelets On Holes
1500mm Sizes
- 5mm GRP Backing
- HIP Class 2 Reflectivity
- 750mm Hole Centres
- Reinforcing Eyelets On Holes
Quick Fit Reflectivity Grades
RA1 - Suitable for street works and slower speed limits, this is supplied on all 650m and 750mm sizes.
Class 2 R2 / RA2 / HIP - High-intensity Prismatic, Suitable for high-speed roadworks on motorways, national speed limits.
Measuring Hole Centres
These should match the sign frames that you already have, or are intending to buy. Some of our signs will come with both sets of holes drilled.
Measuring Sign Face Size
The size of the sign face that you need will be dictated by the guidelines in the Chapter 8 guidelines.
Backing Material
Smaller sizes of signs (650mm & 750mm) are available on a 3mm plastic backing board. Larger sizes are fixed to a more rigid GRP backing board. GRP signs are fitted with eyelets for extra strength. If you need Composite or Dibond sign faces please call us.
Need Assistance Finding The Right Sign?
If you need any assistance finding the right sized sign or frame then please give our customer service team a call on +44 (0)1905 794875. We have many other ranges of signs available including Q-signs, “classic” metal sign faces, and permanent signs.
Specifications
Certifications | |
Conforms | The Red Book / Chapter 8 |
Diagram Reference | 516 |
AccuChecked | ✔ (The specification has been independently checked for accuracy) |
AccuPhoto | ✔ (The photos are of the actual product type that you are ordering) |
Dimensions | |
Depth | 3mm in Plastic |
Height | 750mm |
Material | |
Type | Printed AEGP or HIP Vinyl on Plastic or GRP substrate |
Customer Questions & Answers
Be the first to ask a question.